Sammic OS-140P Manual De Instrucciones página 33

If, after proceeding as above, the flood alarm is repeated, disconnect the power cable,
open the appliance and check that the sensors are not wet. If they are, dry them
carefully.
The appliance must be opened and the anti-flood sensors checked by approved
technicians.
4.6 NON-USE
When the appliance is not used for more than a week, it is advisable to let the water run
for at least 10 minutes before filling the dishwasher tank.
Disinfect the appliance every time the pre-filter is changed or at least once every 6
months.
To perform this operation, contact the dealer where you purchased the product as the
operation must be performed by qualified personnel.
IMPORTANT NOTICE
IMPORTANT NOTICE
EN
-
33