Sammic OS-140P Manual De Instrucciones página 34

EN
4.7 ELECTRONIC CARD OPERATION
OS-140P
With the electronic card in standby mode, press buttons
to enter and/or confirm the menu options.
OS-140P
Manual Flux
Reset T Filters
T RES 0000:00
T Total
0000:00
By pass funct
uS/cm When the control panel is in normal operating mode, the
display shows the name of the appliance or dealer.
0050
Press the button
conductivity of the permeated water.
Mikrotec Ver
Press the button
2.04
Flux In
The membranes are rinsed for 2 minutes.
Progress
This resets the filter operating hours.
press > Reset
T
.
This displays the hours remaining before filter change.
This displays the hours elapsed since the filter change.
By pass inact
to display the instantaneous
and to browse the menu; press the button
to display the software version.
By pass act
This activates the EV2 bypass
solenoid valve.
Confirm with
-
34
-