Publicidad
PREPARATION OF THE ITEM
1. Unfold the handle from the main body until it locks in place. [1]
2. Line up the nozzle with the main body and firmly push into the main body until
the nozzle locks in place. [2]
3. For first use, charge your cleaner for 5 hrs and completely discharged. After first
use the normal charging time is 4 hrs.
4. The indicator light will blink when charging and remain lit when fully charged.[3]
5. Fix the Product Holder to your wall using the screw and holder provided.
1.
USING YOUR CLEANER
4.
MAIN CLEANER
Turn the cleaner on by sliding the On/Off switch[E] to the required settings:[4]
•
HARD FLOOR: First position of On/Off switch, the agitator and nozzle LED
lights are OFF.
•
CARPET: Second position of On/Off switch, the agitator and nozzle LED
lights are ON.
HANDHELD CLEANER
1. Push the handheld release button upward, lift the handheld unit from the main
body.[5]
2. Turn the handheld cleaner on by sliding the On/Off switch [K] forward.
CHARGING/POWER INDICATION*
This cleaner is equipped with a LED display. When the product is working, the display
will report the following indication:
2.
5.
3.
6.
Publicidad
