Replacing The Ac Fuse; Replacing The Dc Connection Cable Fuse - Dometic CFX Serie Instrucciones De Uso

CFX100W
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooler.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the lid open.
➤ Wipe off the defrosted water.
7.13

Replacing the AC fuse

D
DANGER! Danger of electrocution!
Disconnect the power supply and the connection cable before you
replace the device fuse.
➤ Disconnect the power supply to the device.
➤ Pull off the connection cable.
➤ Pry out the fuse insert (fig. 4 2, page 4) with a screwdriver.
➤ Replace the defective glass fuse with a new fuse of the same type and rating
(4 A, 250 V).
➤ Press the fuse insert back into the housing.
➤ Reconnect the power supply to the device.
7.14

Replacing the DC connection cable fuse

➤ Disconnect the power supply from the cooler.
➤ Remove the protective cover (fig. a 2, page 7).
➤ Replace the defective fuse (fig. a 1, page 7) with a new fuse of the same type
and rating (Automotive standard blade fuse, 10 A).
➤ Refit the protective cover.
➤ Reconnect the power supply to the cooler.
I
NOTE – Internal DC fuse
There is an additional DC fuse inside the device (Automotive standard
blade fuse, 10 A). This fuse can only be replaced by an authorised repair
centre.
EN
Operation
27