Descargar Imprimir esta página

Sicce SHARK PRO Serie Manual De Instrucciones página 18

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
The NEW SHARK PRO internal filters are designed to reach in short time an efficient
EN
aquarium filtration and crystal water using a versatile combination of mechanical
,biological and chemical media which are included. A large selection of other SICCE
filter media are available to perform many of the advanced filter tasks needed for
IT
plants aquaria - aquascaping and special water treatments.
GENERAL SAFETY INSTRUCTION
DE
SHARK PRO is made in conformity with the national and international security
laws.
1) Check that the tension on the filter's label matchs the network tension. The filter
has to be supplied by a differential switch (protector), through which the nominal
FR
current is lower or equal to 30mA. 2) This filter can be used only submersed in
water. 3) Before connecting the filter to the electric network, check that the cable
and the filter are not damaged. 4) The filter has a type Z cable link. The cable
ES
and the plug cannot be substituted or repaired; in case of damages substitute the
entire filter. 5) CAUTION: disconnect all the submersed electrical products before
doing any maintenance in the water; in case the plug or the electric outlet are
damaged, disconnect the general switch before disconnecting the electric supply
NL
cable. 6) The filter must not work without water to avoid damages to the motor. 7)
The filter can be used in liquids or in environment with a temperature not higher
than 35° C / 95° F. 8) Do not use the filter for uses different to those for which it
PT
has been designed as, i.e. in bathroom or similar applications. 9) Do not use the
filter with corrosive and abrasive liquids. 10) Individuals with special needs and
children should be supervised when using this product. 11) To prevent accidental
drips from wetting the plug or the socket, make a loop with the cord under the
RU
socket level (Pic. A). 12) Avoid moving the filter by the cord during the installation or
maintenance. 13) The filter can be used only in the above mentioned applications
and it is only for internal use.
CZ
FILTER MEDIA INCLUDED
SHARK PRO 500 = 2 X 20ppi LATERAL Foams + 1 x 30ppi Foam- MECHANICAL
FILTRATION
CN
SHARK PRO 700 = 2 X 20ppi LATERAL Foams + 1 x 30ppi Foam- MECHANICAL
FILTRATION + 2 X 20ppi LATERAL Foams + 1 CARTRIDGE filled with BIOPEARL-
BIOLOGICAL FILTRATION
KR
SHARK PRO 900 = 2 X 20ppi LATERAL Foams + 1 x 30ppi Foam- MECHANICAL
FILTRATION +2 X 20ppi LATERAL Foams + 1 CARTRIDGE filled with BIOPEARL-
BIOLOGICAL FILTRATION + 2 X 20ppi LATERAL Foams + 1 CARTRIDGE filled with
ZEROPHOS - CHEMICAL FILTRATION
The Inner cartridge can be refilled using Sicce Filter Media (recommended) or any
other.
MAIN FEATURES
Components & Spare Parts
1) MAGNETIC HOLDER for glass thickness up to 12mm - 1/2" . (Pic.1A)
2) MAGNETIC CONNECTION from Filter head and Filter body for easy removal and

Publicidad

loading

Este manual también es adecuado para:

Shark pro 500Shark pro 700Shark pro 900