Sicce SHARK PRO Serie Manual De Instrucciones página 20

surface and rotor, and if untreated, may cause undesirable operation or even failure.
EN
Sicce PUMPCLEAN is a super-concentrated, yet completely safe solution to remove
these deposits and keep your filter in tip-top shape.
IT
Key Components To Be Cleaned To Return Your Filter To
Optimal Condition. (Pic.12)
- Rotor
DE
Turn this component , located below the filter's head, from right to the left, to
raise the filter's head. The rotor is in the middle of the module and will be easily
removable For perfect cleaning leave it submerged in water + Sicce PumpClean
for about 30 minutes, then rinse it using a soft brush to remove stubborn deposits.
FR
Re-assemble the filter as per previous operations.
- Filter modules grid
It is advisable to keep the grid always free from small filament or algae which could
ES
block the holes and reduce the flow
It is not necessary to remove the filter media and cleaning can be done from the
extermal face of the filter.
NL
FILTER MEDIA REPLACEMENTS SYSTEM
Biological and Chemical Filtration
The inner cartridge can be totally replaced by purchasing new Ones available in
PT
store and ready to use OR can be open and refilled with the recommened Sicce
Filter media or any other available in the market.
Cartridge or Filter media should be replaced every 4-6 weeks.
Mechanical Filtration
RU
Rinse the foams regularly and replace them in about 6-8 weeks to preserve a
crystal water aquarum.
CZ
UPGRADE (Pic.13)
SHARK PRO Filter can be upgraded by adding extra Unit ( available as spare part)
. You can add as many as necessary for temporary water treatments or to improve
CN
the Filtrartion module.
SHARK PRO can be used VERTICALLY &
KR
HORIZONTALLY for Turtles Kit and Paludarium
(Pic.14)
The Filter can be positioned horizontally or vertically and the filter's modules can be
rotated thanks to a double fitting of the base.
When used with low water level, as per turtles kit or paludarium, the filter will base
on the bottom of the aquarium in horizontal way. In this case, we recommend
to use heavier filter media as the filter's buoyancy, not necessary in this specific
application, could become an issue.