Franklin Electric FWS Serie Instrucciones De Servicio página 16

1. GENERAL INFORMATION
1.1 Use of symbols
ATTENTION
1.2 General information
Check that the items indicated on the delivery note correspond to those actually received and that these
have not been damaged. Before working on the puchased pump, please become fully familiar with all the
instructions given in the supplied documentation. The manual and all the supplied documents, should be
kept with care and be available for consultation for as long as the electric pump is in use.
1.3 Example of data plate
GB
1.4 Warnings
Read carefully the instructions in the documents to get the best results. The following instructions apply to
the standard version of the electric pump operating in normal conditions. Special versions may not fully com-
ply with the indications herein (when necessary, the manual will be supplied with additional information).
The data in the documentation and the product itself may be subject to modification without the manufac-
turer being obliged to give advance warning. Failure to comply with the instructions, improper use of the
pump, or unauthorized modifications to the pump shall void all forms of guarantee, while the manufacturer
shall not be held responsible for any deriving damages to persons, animals or property.
2. SAFETY
The electric pump described in this manual is designed for use in industry, building sites and homes. As
such, it may only be serviced, repaired and dismantled by specialized personnel.In view of the nature of the
pumped fluids, it may be necessary to wear appropriate clothing to protect from contact with the same.
14
The instructions concerning safety are marked by this symbol. Failure to comply with
these instructions could expose personnel to health risks.
The instructions concerning electrical hazards are marked by this symbol. Failure to comply
with these instructions could expose personnel to risks of electrical nature.
Instructions preceded by this word concern the main recommendations for correct
installation, operation, preservation and disposal of the electric pump itself.
Type
Pump type
S/N
Serial number
U
Supply voltage [V]
In
Rated current [A]
Hz
Frequency
P1
Absorbed power [kW]
P2
Rated motor power [kW]
n
Rotation speed
Class...
Motor insulation class
IP 68
Motor protection level
Q
Capacity range [l/s]
H
Head range [m]
H
Minimum head [m]
min
H
Maximum head [m]
max
Maximum immersion depth [m]
t
Maximum temperature of pumped liquid
max
Before operating the pump in any way, always check that the electrical parts are not
connected to the supply mains.