Publicidad
Operating the indoor unit
You can select indoor units to change settings, for example, start or stop them, or change their set
temperature, etc.. Change settings in the "Settings" dialogue.
You can also select multiple indoor units and operate them using the same settings.
1
Touch [Operation/Status] in "Oper./
Status".
1
2
Touch [I/D unit list].
The "I/D unit list" screen is displayed.
z
3
Put a check mark in the "Select" column.
Select the indoor units whose settings you want to change.
z
You can touch [Select all] to change the settings in a batch.
z
3
10
4
2
5
Touch [Operation].
The "Settings" dialogue is displayed.
z
Note
y There may be differences in the items you can set in the
"Settings" dialogue, depending on the model of the indoor
unit.
y When you have selected multiple units, setting items in
common are displayed in the "Settings" dialogue.
Change the settings of the items.
Common display area
Operation display area
Select an item from the common display area and set the
operation in the operation display area.
Item
ON/OFF
Set whether to start or stop operation.
1)
Touch [ON/OFF].
2)
Select "ON" or "OFF".
Mode
Set the operating mode.
1)
Touch [Mode].
2)
Select the operating mode (
(drying),
(automatic)).
4
Explanation
(heating),
(cooling),
(fan),
Publicidad
