FIG. 13
20. Attach the Control Box (#34) to middle of the Front Horizontal Ramp Support Tube (#11) as shown in FIG.13A.
21. Run the rest of the Control Wire (#16) through the loops on the Ball Return with Side Netting (#35) and plug it
into the Control Box (#34) as shown in FIG. 13.
FIG. 13
FIG. 13A
Control Box
34
11
Control Wire
FIG. 14
22. Folding position when not in use the
basketball game and insert the Lock
Pin (#31) as shown in FIG 14.
Note: The lock pin (#31) needs
to be removed from its original
position when the game is being
used before insertion to the new
position when folded.
16
FIG. 14
10
IMPORTANT!
Make sure to use the Lock
Pins (#31) to secure the Ball
Return with Side Netting in
place.
Lock Pin