FIG. 10
13. Slide elastic straps and sleeve of Ball Return with Side Netting (#35) onto Top Net Hanger Tubes as shown in
FIG. 10A & 10B.
14. Slide the Front Horizontal Ramp Support Tube(#11) into the sleeve of Ball Return with Side Netting(#35) as
shown in FIG. 10C.
15. Connect the Front Horizontal Ramp Support Tube(#11) to the Front Ramp Tube (#10) using spring lock as
shown in FIG. 10D.
16. Slide the Long Horizontal Cross Brace(#13) in front of the Ball Return with Side Netting(#35) and attach it
to the Front Horizontal Ramp Support Tube (#11) using Bolts(#24), Washers(#22) and Nuts(#28) as shown
in FIG.10E.
35
11
FIG.10
FIG.10B
FIG.10C
FIG.10E
28
22
13
11
35
24
#36
Spring Lock
8
FIG.10A
35
11
FIG.10D
10