Publicidad
Idiomas disponibles
Idiomas disponibles
FIG. 8 & 9
11. Attach the Rim Assemblies (#17) and Rim Support Plates (#18) to the Backboard (#21) using the Bolts (#23),
washers (#22) and Nuts (#28). And then attach the Switch and Paddle Assembly (#15) to the Backboard (#21)
using the Bolts (#23), washers (#22) and Nuts (#28). Make sure that you use washer on both sides of the
backboard as shown in FIG. 8.
12. Attach the Electronic Scorer Face Plate(#30) to the front of Backboard and connect with the Electronic Scorer(#14)
using Bolts(#29) as shown in FIG. 9.
FIG. 8
28
22
1
8
FIG. 9
28
22
1
8
22
1
5
1
7
29
14
7
21
15
23
30
17
22
23
Publicidad
