Publicidad
FIG.3
7. Attach the Leg Support (#7) to the Leg (pre-assembled) using
three Bolts (#18) and three Washers (#19) per Leg. See FIG.3.
8. Repeat the steps above for the other legs.
NOTE: Please make sure that all connections are tight.
FIG. 3
FIG.4
9. Attach the Apron Corner (#31) to the End Apron (#3) using two Screws (#15) per Apron Corner. See FIG.4.
10. Repeat the steps above for the other apron corners.
15
8
FIG. 4
3
5
18
19
7
31
Publicidad
