RISCO Group LightSYS Manual De Instalación Y Programación página 226

Teclas
 

 Lector de Proximidad
[ProSYS [8][2]]The Sounder menu enables to define all Parámetros of external
sounder that can be connected to the LightSYS as a bus accessory.
For detailed description of the wiring, installation and additional software
programming options refer to the instructions supplied with the sounder.
Up to four sounders can be added to the LightSYS and each can be assigned to any
partition. Connection to the bus enables remote control and diagnostic support for
sounder.

Parámetros

Lamp Times

(if installed)
Note
Access to this sub‐menu requires that a sounder dispositivo is installed on your site. For
details, see page ¡Error! Marcador no definido..
Dispositivo: Sounder
Quick Keys

Parámetro
Alarma Sirena
Ajustar el tipo del sonido de sirena. Definir cual de los cuatro
sonidos de alarma es asociado con esta sirena:
 SONIDO 1
 SONIDO 2
 SONIDO 3
 SONIDO 4
Lamp Times
Specify here the sounder lamp illumination duration

Lamp Start
–Specify here the start time for the sounder lamp to
be activated and press

Lamp Stop
––Specify here the stop time for the sounder lamp
to be disactivated and press
Parámetro
Parámetros
Por defecto
[5IN1344 L8PSProgInst [8][4][1][9]]
to confirm
to confirm
Por defecto
Página 226
Rango
Rango