RISCO Group LightSYS Manual De Instalación Y Programación página 229

Operación
Scheduler
Weekly — Enables you to define up to four weekly programs with up to two
time intervals per day, during which the system automatically arm/disarm,
activates utility output, or prevents users from disarming.
One Time — Enables a one time operation of automatic arm/disarm of the
system at a specific time within the next 24 hours.
Schedule Enable — Enables to activate or deactivate predefined schedules.
Vacaciones
Enables to define up to 20 holiday periods and the partitions that will be set
automatically during the holiday.
Memoria de Eventos
Allows the viewing of significant system events including date and time.
Notas

La memoria de eventos no puede ser borrada.

Durante la revisión de la memoria de eventos, se puede saltar de 10 en
10 eventos cada vez, hacia atrás o hacia adelante, pulsando a la vez las
teclas
Mantenimiento
Walk test
Enables to easily test and evaluate the operation of selected zones in your
system. Walk test is set for up to 60 minutes. During the last 5 minutes of walk
test mode, the keypad used to perform the walk test will indicate that the walk
test is about to end.
Full walk test — The test will display the detected zones and type of detection.
Quick walk test —The test will display the undetected zones
Keypad test
Momentarily tests the keypad indicators.
Siren test
Activates the squawk sound in the selected siren.
Strobe Test
Activates the strobe in the selected system arming??.
Wireless Test
Activates the relevant tests for recognized wireless dispositivos.
Pulsadors (up to four)
Communication Test— Activates the sensory ...
Battery Test — Activates the sensor....
Diagnostics
o consecutivamente
Página 229