RISCO Group LightSYS Manual De Instalación Y Programación página 228

Operación
Used to test Follow Me reporting.
View
Trouble
Should be used when the system has detected a problem, which is evidenced
by the rapid flashing of the
Keypad Manual.
Alarm Memory
Displays the five most recent alarm conditions stored by the system
Partition Status??
Allows the viewing of the partitionsʹ status, the troubles in the system and all
"not ready" zones.
Pressing on the
status of the partition to which the keypad is assigned. Pressing the sequence
[CODE]
the partitions assigned to the user code.
Zone Status
Allows the display of all system zones and their current status.
Service Info
Allows the display of any previously entered service information and the
system version.
IP Address
Use this option to view the IP address of the LightSYS. This option is
available only if IP module is defined in the system.
Trouble
Use this option to display ?? any outstanding zone violations.
Alarm Memory
Use this option to display ?? the most recent alarm incurrence.
Clock
Time & Date
Use this option to set the system time and date, in the format:
HH:MM DD/MM/YY
as described on page ¡Error! Marcador no definido.. This definition is
required for setting the scheduler programming in the system.
Power icon, as described in the LightSYS LCD
key from the normal operation mode displays the
from the normal operation mode will display the status of all
Página 228