Using the remote controller
5 Manual clean mode & Direction control
Move forward
Turn left
Turn right
✻ Moving backward is not available.
6 Point cleaning
Available only with C type remote controllers.
You can use the remote controller to point and clean the desired spot while the
POWERbot is in cleaning process.
Point the red light on the floor within 1.6 ft (0.5 m) of the POWERbot's location.
Press and hold the Point cleaning button to move the red light to the desired spot. The POWERbot
will follow the light while cleaning.
Operating distance of the remote controller
Height of the
remote controller
Operating distance
Inserting batteries
Open the battery cover by lifting it
up while pressing the locking tab.
Insert the batteries as shown in
the illustration, and then close the
cover until it clicks into place.
Select to move forward
Select to turn left
Select to turn right
Height of the
1.6 ft (0.5 m) 3.3 ft (1 m) 4.9 ft (1.5 m)
remote controller
Operating
About 4.9 ft
distance
ENGLISH-20
About 6.6 ft
(1.5 m)
(2 m)
About 9.8 ft
(3 m)