Samsung POWERbot SR1AM70 Serie Manual Del Usuario página 33

Since the brush removes dirt from the
floor during cleaning, foreign matter such
as thread, long hair, etc. may get caught in
it. For the best cleaning results, check and
clean it regularly.
If a brush or brush cover is not assembled
correctly after the maintenance work,
scratches may occur on the floor, or
product malfunction may occur. Therefore,
assemble them correctly by checking the
maintenance method.
About the battery
Notes
Purchase batteries at authorized Samsung
centers and check for the Samsung
symbol (
Confirm that you have the correct model
battery before purchasing.
This battery is exclusively for the
Samsung Electronics POWERbot. Do not
use it for any other product.
Do not disassemble or modify the battery.
Do not throw the battery out in a fire or
heat it.
Do not connect any metallic object to the
charging contacts (+, -).
Store the battery indoors (at 0 °C~40 °C).
If the battery malfunctions, do not
disassemble it yourself. Contact your
nearest Samsung service center.
Battery charging time and usage time
may decrease the more the battery is
used. If the battery's lifespan has been
exceeded and it no longer recharges or
functions properly, have it replaced at a
Samsung service center.
The battery warranty period is 6 months
from the date of purchase.
) on the battery.
ENGLISH-33
About the IrDA sensor
Caution
Infrared signal transmission may not be
smooth in locations exposed to halogen
lamps or in outdoor locations.
The POWERbot uses 3 types of infrared
devices. Each of the devices has a
different priority level. A device may
not work if it's signal is superseded by a
device with a higher priority.
– Infrared signal Priority: Remote control >
Docking station
Different infrared signals may interfere
with one another and cause the devices to
malfunction if they are used together in a
small space or in close proximity.
If more than one POWERbot is used
simultaneously, they may malfunction due
to interference between infrared signals.