Publicidad
Idiomas disponibles
Idiomas disponibles
To start the cleaning mode, press the left (n°46) and right (n°48) hand buttons simultaneously
6.2
Work area
The work area is at the front of the machine (fig.3, n°18).
6.3
Safety features
This machine is equipped with:
An encoded magnetic safety switch (fig.6, n°19, 20)
Comprising a safety cut-out magnet and a magnetic sensor, which stops the machine when the front
door is opened (fig.1, n°10).
An encoded magnetic safety switch (fig.6, n°22)
Comprising a safety cut-out magnet and a magnetic sensor, which prevent the machine from starting
when the cover is opened (fig.1, n°1).
A mechanical safety lock (fig.6, n°21)
Which prevents the cover (fig.1, n°1) from being opened while the machine is in operation.
Caution: never start the slicer if any part of the exterior has been removed allowing access
to the blade or rotating drive components.
English
12
Publicidad
