Parkside PWSAP 20-Li D4 Traduccion Del Manual De Instrucciones Originales página 81

Starting the device
Switching on/off
Check the attached tool before use to ensure that
all fastening elements are correctly fitted.
NOTE
► Always switch on the angle grinder before
making contact with the material, then apply
it to the workpiece.
► If the tool blocks due to an overload and
switches off, it will restart automatically as
soon as the cause of the blockage is removed
(auto-start function).
Switching on
♦ First, press the ON/OFF switch 1 to the right
so that you can then press it forwards.
Switching off
♦ Let go of the ON/OFF switch 1.
Switching to continuous operation:
♦ First, press the ON/OFF switch 1 to the right
so that you can then press it forwards. Then
press the ON/OFF switch 1 forwards and
down until it engages.
Switching off continuous operation
♦ Press the ON/OFF switch 1 to the rear and
downwards and release it.
Setting the rotational speed
You can use the speed control 2 to select the
rotational speed:
(1 = slower speed, 6 = faster speed).
The set speed level is displayed under the speed
control 2.
We recommend you carry out practice tests to
determine the correct speed.
The speed can also be changed during operation.
PWSAP 20-Li D4
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the tool off and remove the
batteries before carrying out any
work on the tool.
The cordless angle grinder is maintenance-free.
■
Do not use any sharp objects for cleaning the
tool. Do not allow any liquids to get into the
tool. Otherwise the tool could be damaged.
■ Clean the tool regularly, preferably immediately
after use.
■ Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners which can attack the
plastic.
■ A vacuum cleaner is required for thorough
cleaning of the tool.
■ Ventilation openings must never be obstructed.
■ Remove any sanding dust stuck to the tool with
a brush.
NOTE
► Replacement parts not listed (such as switches)
can be ordered via our Service Hotline.
WARNING!
■ Do not use any accessories that are not rec-
ommended by PARKSIDE. This can lead to an
electric shock and fire.
GB │ MT │ 73 ■