Segway GT Serie Manual Del Producto página 2

EN
Diagram
1
Front Brake Lever
Right Turn Signal
Headlight
Daytime Running Light (DRL)
Quick Release Lever
Folding Mechanism
Safety Button
Horn
Front Shock Absorber
Front Reflector
Front Fork
Front Fender
Front Hub Motor
* For GT2 only
Front Wheel
Front Disc Brake
Side Reflector
01
Handlebar Functions
Dashboard
Handlebar
Rear Brake Lever
Left Turn Signal
Stem
Charging Port
Name
Footboard
Rear Shock Absorber
Ambient Light
Power Button
Rear Fender
Taillight &
Brake Light &
Left Control
Rear Reflector
Switch
Rear Turn Signal
Rear Hub Motor
Right Control
Rear Disc Brake
Switch
Battery Compartment
Kickstand
Throttle
Turn Signal
Button
Horn Button
Function Operation method
Press the Power Button to power on the scooter. Press and hold to power it off. Note: Only available when
Power on/off
the scooter is unlocked.
Wake up the screen Press the Power Button to wake up the screen when the screen automatically dims.
Back to the previous speed When the scooter automatically enters PARK mode, press the Power Button to go back to the previous
mode (for GT2 only) speed mode.
Confirm Bluetooth While connecting to the scooter via the Segway-Ninebot app, press the Power Button to confirm Bluetooth
password password.
Turn on/off the headlight Rotate the Left Control Switch clockwise/counterclockwise to turn off/on the headlight.
Press the Left Control Switch to turn on the cruise mode, and the scooter will cruise at a constant speed.
Turn on/off the cruise
Press again to turn it off.
mode (for GT2 only）
Switch between 1WD and When the scooter is at a complete stop, press and hold the Left Control Switch to switch between 1WD and
2WD (for GT2 only） 2WD.
Mode switching Rotate clockwise/counterclockwise to switch between speed modes.
1) Press the Right Control Switch to activate the BOOST mode.
Activate the BOOST mode
switch the speed mode to turn it off.
(for GT2 only）
For GT1: When the scooter is at a complete stop, press the Right Control Switch to switch to WALK mode.
At this point, press the Right Control Switch again to go back to the previous speed mode.
Switch to WALK
For GT2: When the scooter is at a complete stop, press and hold the Right Control Switch to switch to
mode
WALK mode. At this point, press and hold the Right Control Switch again to go back to the previous speed
mode.
Speed up
Twist the throttle to speed up.
Press the left/right side of the Turn Signal Button, the left/right turn signal will turn off after three blinks.
Turn on/off the left/right
press and hold the left/right side of the Turn Signal Button, the left/right turn signal will keep blinking until
signal
it is released.
Turn on the horn Press the Horn Button, the scooter will beep once.
EN
Throttle
Power Button
Right Control Switch
Horn Button
Left Control Switch
Turn Signal Button
* In RACE mode only. 2) Press again or
02