Dirt Devil UD20120 Manual Del Usuario página 15

HOW TO HOW TO
BELT OR BRUSHROLL:
REMOVAL & REPLACEMENT
4. TO REPLACE BELT OR
BRUSHROLL: Slide belt onto
motorshaft.
6. With new belt in place, pull and
slide brushroll into nozzle making
sure that the brushroll end caps
are in the correct orientation (6a
inset). Rotate brushroll manually to
make sure belt is properly aligned.
MOTOR SHAFT
6a.
5. Place new belt in area of brushroll
without bristles
7. Reattach nozzle guard.
15