Publicidad
Idiomas disponibles
Idiomas disponibles
• Vacuum cleaner must be in the upright position to lift the rotating brush off the carpet when
doing above floor cleaning.
• Brushroll continues to turn while product is turned on and handle is in the upright position.
To avoid damage to carpet, rugs, and flooring, avoid tipping cleaner or setting it on furniture,
fringed area rugs, or carpeted stairs during tool use.
• Do not use an extension cord with this vacuum cleaner.
• Store the vacuum cleaner indoors. Put the vacuum cleaner away after use to prevent tripping
accidents.
• Operate cleaner only at voltage specified on date plate on back of cleaner.
CAUTION: TO REDUCE THE RISK OF DAMAGE:
• Avoid picking up hard, sharp objects with this product, as they may cause damage.
• Store appropriately indoors in a dry place. Do not expose machine to freezing temperatures.
• Do not use sharp objects to clean out hose as they can cause damage.
SAVE THESE INSTRUCTIONS
WARNING:
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in any way.
NOTICE
AN INTERNAL THERMAL PROTECTOR HAS BEEN DESIGNED INTO
YOUR CLEANER TO PROTECT IT FROM OVERHEATING. WHEN
THE THERMAL PROTECTOR ACTIVATES THE CLEANER WILL STOP
RUNNING. IF THIS HAPPENS PROCEED AS FOLLOWS:
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty dirt cup.
3. Inspect the nozzle and bag inlet openings for any obstructions. Clear
obstructions if present.
4. When cleaner is unplugged and motor cools for 30 minutes, the thermal
protector will deactivate and cleaning may continue.
If the thermal protector continues to activate after following the above
steps, your cleaner needs servicing.
5
Publicidad
