Descargar Imprimir esta página

Infiniton DD13SA Manual De Instrucciones página 49

Publicidad

Idiomas disponibles

Idiomas disponibles

Causes of Damage
1. Accessories, foil, greaseproof paper or ovenware on the
cavity floor: do not plac accessories on the cavity floor
Do not cover the cavity floor with any sort of foil r
greaseproof paper. Do not place ovenware on the cavity
floor if a temperature of over 50 ºC has been set. This wil
cause heat to accumulate. The enamel will be damaged.
2. Aluminum foil: Aluminum foil in the cavity must not come
into contact with the door glass. This could cause
permanent discoloration of the door glass.
3. Silicone pans: Do not use any silicone pans, or any mats,
covers or accessories that contain silicone. The oven
sensor may be damaged.
4. Water in a hot cooking compartment: do not pour water
into the cavity when it is hot. This will cause steam. The
temperature change can cause damage to the enamel.
5. Moisture in the cavity: Over an extended period of time,
moisture in the cavity may lead to corrosion. Allow the
appliance to dry after use. Do not keep moist food in the
closed cavity for extended periods of time. Do not store
food in the cavity.
6. Cooling with the appliance door open: Following operation
at high temperatures, only allow the appliance to cool
down with the door closed. Do not trap anything in the
appliance door. Even if the door is only left open a crack,
the front of nearby furniture may become damaged over
6

Publicidad

loading