Ashdown Engineering STUDIO RANGE Manual De Instrucciones página 5

ASHDOWN ENGINEERING - STUDIO 10
FEATURES
1. On - light indicates the amplifier is
powered.
2. Shape - A switchable pre-shape EQ.
3. Pre-Gain - A rotary control to set
the input sensitivity of the amp in
conjunction with your instrument.
4. Drive - A rotary control to adjust the
amount of tube emulated overdrive.
5. Bass - A rotary control to adjust the
amount of Bass +/- 15dB.
6. Lo-Mid - A rotary control to adjust the
amount of Lo-Mid +/- 15dB.
7. Middle - A rotary control to adjust the
amount of Middle +/- 15dB.
8. Hi-Mid - A rotary control to adjust the
amount of Hi-Mid +/- 15dB.
9. Treble - A rotary control to adjust the
amount of Treble +/- 15dB.
USER GUIDE
10. Volume - A rotary control to adjust the
overall output of the amp.
11. Headphones - 1/4" Headphone Jack
Output (this actively mutes the speaker for
silent practice).
12. Line In - For use with a line level instrument
or audio device such as an MP3 player
13. Passive/Active - A -15dB input pad for use
with active instruments
14. Input - a 1/4" Jack Socket for use with your
instrument
ASHDOWN ENGINEERING - STUDIO 10
15. Power Switch - Turn your amp on or off
16. IEC Power input - a fused IEC power inlet
for use with the supplied cable
USER GUIDE