Publicidad
Idiomas disponibles
Idiomas disponibles
ASHDOWN ENGINEERING - STUDIO 210
1 2 3
4
5
6
7
17
16
FEATURES
1.
On - light indicates the amplifier is
powered.
2.
Shape - A switchable pre-shape EQ.
3.
Pre-Gain - A rotary control to set
the input sensitivity of the amp in
conjunction with your instrument.
4.
Drive - A rotary control to adjust the
amount of tube emulated overdrive.
5.
Bass - A rotary control to adjust the
amount of Bass +/- 15dB.
6.
Lo-Mid - A rotary control to adjust the
amount of Lo-Mid +/- 15dB.
7.
Middle - A rotary control to adjust the
amount of Middle +/- 15dB.
8.
Hi-Mid - A rotary control to adjust the
amount of Hi-Mid +/- 15dB.
9.
Treble - A rotary control to adjust the
amount of Treble +/- 15dB.
USER GUIDE
8
9
10
11
12
13
15
14
10.
Volume - A rotary control to adjust the
overall output of the amp.
11.
FX Loop - a TSR Jack is provided for use
with a Y cable (tip send ring return).
12.
Di - A balanced XLR Di Output.
13.
Headphones - 1/4" Headphone Jack
Output (this actively mutes the speaker for
silent practice).
14.
F/S - Footswitch out for use with an FS-
1single latching footswitch (sold separately)
to control the Drive in/out.
15.
Line In - For use with a line level instrument
or audio device such as an MP3 player
16.
Passive/Active - A -15dB input pad for use
with active instruments
17.
Input - a 1/4" Jack Socket for use with your
instrument
18.
Power Switch - Turn your amp on or off
ASHDOWN ENGINEERING - STUDIO 210
20
21
22
19
19.
IEC Power input - a fused IEC power inlet
for use with the supplied cable
20.
Tweeter Mute - a simple on/off switch to
engage/defeat the on board HF tweeter
21.
Speaker Mute - a simple on/off switch to
mute the on board speaker for silent use
22.
Speaker Output - An 8 Ohm speaker 1/4"
output for use with an extension speaker
USER GUIDE
18
Publicidad
