Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Check if the electrical installation is suitable for the operation of the product. If the electrical installation
is not suitable, call an electrician and a plumber to carry out the necessary repairs. The manufacturer
cannot be held responsible for damage caused by unauthorised operations.
WARNING: It is the customer's responsibility to prepare the place where the product will be placed, as
well as the electrical installation.
WARNING: When installing the product, the local electrical installation regulations must be observed.
WARNING: Check the product for damage before installation. Do not install the product if it is damaged.
Damaged products pose a safety risk.
Suitable place for installation
650mm min.
1. Separate the burners, burner covers and grills from the product.
2. Turn the top plate upside down and place it on a smooth surface.
3. To prevent foreign bodies and liquids from entering between the hob and the cooktop, apply the paste
supplied in the package to the sides of the bottom protection of the hob.
For the corners, roll up the paste and increase the curls to fill the gaps in the corner.
4. Replace the plate on the worktop.
5. Secure the plate to the worktop using the clamp and screws provided.
Installation diagram
The product is designed in accordance with the kitchens
available on the market. A safety distance must be left
between walls and kitchen units. If a hood/extractor is to be
installed above the product, follow the hood/extractor ma-
nufacturer's recommendations for the mounting height (min.
65 cm).
The recess in which the hob is to be placed on the hob must
be cut in accordance with the installation dimensions of the
hob.
installation dimensions of the hob.
For the installation of the product, the standards specified in
the relevant local regulations must be complied with.
The installation of the product must comply with the rules
specified in the local electrical regulations.
35
English
infiniton.es
Publicidad
