Publicidad
Idiomas disponibles
Idiomas disponibles
I_0008en4A.fm
1.
Component Overview
3
2
1
8
7
1 Float switch level control
2 Handle / lifting eye
3 Power cable with plug
4 Float switch
5 Non-return valve
6 Discharge port for multi-adapter
7 Suction inlet
8 Pump casing
2.
Please Read First!
– Read these instructions in full before oper-
ating. Pay special attention to the safety
instructions.
– These instructions are intended for per-
sons with basic technical knowledge in
handling tools such as the one described
here. If you have no experience with this
5.7.10
4
5
6
1
Operating Instructions
type of tool we strongly recommend that
you seek the advice of an experienced
person before operating this tool.
– If you notice transport damage while un-
packing, notify your supplier immediately.
Do not operate the tool!
– Dispose of the packing in an environmen-
tally friendly manner. Take to a proper col-
lection point.
– Keep all documents supplied with the tool
for future reference. Retain your proof of
purchase for any future warranty claims.
– If you lend or sell this tool be sure to in-
clude the documents supplied with the
tool.
– The equipment manufacturer is not liable
for any damage arising from disregard of
these instructions.
Information in these operating instructions is
designated as shown below:
A
Danger!
Risk of personal injury or environmental
damage.
B
Risk of electric shock!
Risk of personal injury from electric shock.
A
Caution!
Risk of material damage
3
Note:
Additional information.
– Numbers in illustrations (1, 2, 3 ...)
– indicate component parts;
– are consecutively numbered; and
– refer to the corresponding numbers in
brackets (1), (2), (3) ... in the neigh-
bouring text.
– Numbered steps must be carried out in
sequence.
– Instructions which can be carried out in
any order are indicated by bullet points (•).
– List items are indicated by dashes (–).
ENGLISH
9
Publicidad
