Silvercrest STWSK 3 A1 Instrucciones De Servicio página 40

Earphones
NOTE: in order for the earphones 1/6 to be charged, the
charging box 12 must be connected to a USB power unit or PC
or the battery of the charging box must be charged.
1. Place the earphones 1/6 in the charging box 12. The right
earphone 6 must be placed in the right-hand charging
tray 10, the left earphone 1 in the left-hand charging
tray 14. The charging contacts of the earphones 8 are now
positioned on the charging contacts 13 of the charging box.
The LED 3/4 is lit continuously during the charging process.
2. When the LED 3/4 has gone off, the battery of the ear-
phone 1/6 is fully charged.
7. Operation
7.1 Switching the earphones on and off
Switching on
• Remove both earphones 1/6 from the charging box 12.
These are switched on automatically.
• In order to switch the earphones 1/6 back on after they
have been switched off outside the charging box 12, press
and hold the multifunction buttons 2/5 for approx.
5 seconds in each case until an acoustic signal is heard.
Switching off
NOTE: the earphones 1/6 switch off automatically ...
... after 5 minutes without any connection to an audio device.
... if the battery is too weak.
• In order to switch off the earphones 1/6, remove them
from your ears and place them in the charging box 12.
This automatically switches the earphones off and charges
them up.
38
GB