10 IMMERSION BLENDER
24. Packaging must never be left within the reach of children
since it is potentially dangerous.
DO NOT THROW AWAY THESE INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE (FIG. 1)
A. Detachable rod
B. Cable gland with eyelet
C. Speed I button
D. Speed II button
E. Power unit
INSTRUCTIONS FOR USE
IMPORTANT: ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY
MAINS BEFORE FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE
CLEANING THE APPLIANCE.
- Fit the rod (A) to the power unit (E):
IMPORTANT: Make sure that the rod is correctly fitted before using the appliance.
- This blender can be used to prepare sauces, soups, mayonnaise, baby food,
cocktails and shakes.
It can be used in a container or directly submerged in the pan containing the mix to
be blended, which must not be standing on a heat source, to prevent the appliance
from overheating. Start and stop the appliance while the blade set is submerged in
the container with the food to avoid possible splashing. We also recommend using
the appliance in short bursts since this is the way to achieve the best possible result
and the only way to prevent the appliance motor from overheating.
IMPORTANT: Only use the appliance for 30 seconds at a time when preparing
recipes, after which, leave it to cool to room temperature.
- Place the food for blending in a container and plug the appliance into the power
mains.
- The blender has two speeds according to the type of food to be blended; press
gently on the button (C) for the lower speed, or on the button (D) for a higher speed.
- After use, wait for the blade set to stop moving completely and then unplug the
appliance from the power mains.