Publicidad
Driving mode and battery mode are set via a jumper:
Protective functions
1. Battery protection:
controller detects undervoltage in the battery.
Level 1: Controller limits the power
Stage 2: controller switches off
CHARGE BATTERY PACK
green
INSERTING THE DRIVE BATTERY
1 To remove the body - swing to open.
2 Insert the battery.
3 Fix it with the mounting brackets.
Advice
•
Non-rechargeable batteries are not to be recharged.
•
Rechargeable batteries are to be removed from the toy before being charged.
•
Rechargeable batteries are only to be charged under adult supervision.
•
Batteries are to be inserted with the correct polarity.
•
Exhausted batteries are to be removed from the toy.
•
The supply terminals are not to be short-circuited.
•
Regular examination of transformer or battery charger for any damage to their cord, plug,
enclosure and other parts.
GB // 12
Mode
F/B
F/B/R
BOAT
Batt
Lipo
NiMH
red
Jumper settings:
Model selection:
„F / B / R" forward- brake-backward
„Boat" forwards -backwards (without brake)
„Crawler mode" forward-backward (handbrake)
Factory setting:
Battery: LiPo
Driving mode: „F / B / R" forwards-braking-backwards
2. Temperature protection:
Speed controller temperature higher than 100 ° C
•
Engine output is reduced to prevent the vehicle from suddenly stopping. „LEDs are flashing"
Speed controller temperature less than 80 ° C
•
Motor output is normalized again
LED green
LED red
Technical data:
Input:
5V / 2A
Output:
7.4 V / 1000mA
Automatic power off:
Yes
Plug:
XHP
Compatible rechargeable
batteries:
Lithium
Publicidad
