aTTach LIFT BracKeTS To MounTInG
BracKeTS
STeP 10:
(See FIGure 10)
• Attach the two lift brackets (12) to the two mounting
brackets (11) with the two bolts (C) above the two bolts
(D).
• Secure the two hex bolts (C) with the four washers (W)
and two Nylock hex nuts (O).
• Secure the two hex bolts (D) with two Nylock hex
nuts (M).
W
11
W
O
M
C
D
12
FIGure 10
aSSeMBLe ThaTcher SPrInGS To TIne
MounT BracKeT
STeP 11:
(See FIGure 11)
• Onto one tine mount bracket (14), attach six thatcher
springs (15) using six hex bolts (B), six washers (T),
and six rubber washers (S).
• Secure the hex bolts (B) and washers using six Nylock
hex nuts (L).
• On the second tine mount bracket, attach six thatcher
springs (15) in a staggered pattern from the first tine
mount bracket using six hex bolts (B), six washers (T),
and six rubber washers (S).This will ensure the
thatcher springs (15) are not directly in front of the
tines on the previous tine mount bracket.
• Secure the hex bolts (B) and washers using six Nylock
hex nuts (L).
14
14
9
B
T
S
15
L
FIGure 11a
B
T
S
15
L
FIGure 11b