Horizon Fitness T101 Manual Del Propietário página 13

ASSEMBLY STEP 3
HARDWARE FOR STEP 3
PART TYPE
A BOLT
B SPRING WASHER
C FLAT WASHER
(STEP 3.5)
5
A
1
DESCRIPTION QTY
M8X1.25PX15L 4
8.0X13.0X1.5T
4
8.2X13.0X1.4T
4
3
3
C
B
4
NOTE: Be careful not to pinch any wires
while assembling the console.
3.1 Open HARDWARE FOR STEP 3.
3.2 Gently place the CONSOLE (5) on top of the
CONSOLE MASTS (1&4). Attach the LEFT SIDE
first using 2 BOLTS (A), 2 SPRING WASHERS (B)
and 2 FLAT WASHERS (C).
3.3 The CONSOLE CABLES (3) are tucked into the
RIGHT CONSOLE MAST (4). Using the lead wire
carefully pull the CONSOLE CABLE (3) out of
the RIGHT CONSOLE MAST (4). Detach and and
discard the LEAD WIRE. Connect the CONSOLE
CABLES (3) and carefully tuck wires in masts to
avoid damage.
3.4 Attach the RIGHT SIDE of the CONSOLE (5)
using 2 BOLTS (A), 2 SPRING WASHERS (B) and
2 FLAT WASHERS (C).
3.5 Pull the top of the CONSOLE (5) towards
the back of the treadmill and HOLD while
TIGHTENING THE LEFT AND RIGHT SIDE
BOLTS (A).
3.6 REMEMBER to tighten ALL BOLTS & SCREWS
completely now that assembly is finished.
A
13
B C