Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
GETTING TO KNOW YOUR CONTROLLER
CONTROL KNOB
1. Push the control knob once to turn the unit
on. The controller will flash several times
and then turn to a solid screen. This lets you
know your unit is powered on.
2. Push the control knob again, this will take
you to the function screen where you can
access the functions listed previously.
3. Rotate the knob until you see the function you need.
4. Push the control button to lock in after you have chosen the preferred
function.
5. Press and hold the control button to turn the unit off. This will begin the 10
min cool down timer. The unit will automatically shut off when the timer
has ended.
6. The following page will detail how to set each of the controller functions.
16
16
DIGITAL LED SCREEN
This is used as the information center for your unit.
Push control button once to power on the unit. The
LED screen will display the following functions:
•
Temperature (F or C)
•
Timer
•
Meat Probe Temperatures (if connected)
•
Battery level (if powered by battery)
•
AC adapter icon (if powered by AC adapter)
•
Prime
•
Cleanout
•
Fan, Auger, Igniter indicator
•
Battery REMOVE indicator (when applicable)
POWER
There are (2) options to power your
Prime 300 grill:
1. With an AC adapter that plugs into
grounded (GFCI) outdoor receptacle 120 volt.
2. With a 12V Rechargeable Lithium-Ion
Battery. You can use one power method
or have both the battery and AC adapter
plugged into the unit at the same time.
Publicidad
