Descargar Imprimir esta página

Halo PRIME 300 Guía Esencial página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROLLER INDICATOR
LIGHTS
FAN
The fan icon will be lit when the fan is
operating.
1. Supplies fresh air to the burn pot for
combustion.
2. Generates an even fan-forced heat
circulation, so your food cooks evenly on
all sides.
3. Helps the pellets burn more efficiently.
4. Performs maintenance evacuation of
ashes from burn pot during cooking and
shutdown functions.
POWER SOURCE
BATTERY
There will be a battery icon on the controller
after you insert the battery into the unit to let
you know the grill is powered with battery.
AC ADAPTER
There will be an AC plug icon on the controller
when the AC adapter is plugged into your unit
to let you know the unit is powered on with AC
power.
18
18
AUGER: PELLET
FEED SYSTEM
The Auger function icon will appear during
startup and switches ON and OFF during cooks
to periodically feed the pellets.
1. Delivers the pellets from the pellet hopper,
through the auger tube, to the burn pot at
a controlled programed speed for efficient
combustion.
2. The amount of time the auger feeds pellets,
will depend on which temperature you
want to grill or to smoke.
IMPORTANT TO NOTE:
• Both icons will appear on the controller when
you have both plugged into your grill. Your
grill is powered, but not on at this time.
• The battery will charge in the unit when the
AC adapter is plugged in. The average time
for a battery to charge is between 5-6 hours.
The alternative way to charge the battery is to
remove the battery from the unit and charge
with a Halo charging dock. The charging dock
can be acquired at www.halo-pg.com (once
available for purchase).
ELECTRONIC
IGNITER
The igniter function icon will appear during the
startup and switches ON and OFF during cooks to
maintain temperature.
1. This is a type of ignition system that works
electronic circuits, usually by transistors.
The transistors are controlled by sensors to
generate electric pulses which then generate
a high voltage spark that can burn the lean
mixture and provide a better economy and
lower emission.
2. The igniter will come back on when the
temperature falls 20 degrees below the set
temperature.
BATTERY
WARNING
1. If the controller displays the
"REMOVE"
red, the battery needs to be removed from the
unit promptly to prevent any damage to the
battery.
2. This indicates the battery temperature is too high.
Let the grill cool down to ambient temperature,
insert the battery again, and restart the unit.
3. If this persists, please call consumer services at
1-833-572-1688.
icon in

Publicidad

loading