Denver MRP-151 Manual De Uso página 30

Stop
1. Press (8) to stop playback.
Skip +/- ( / )
1. Press (24) to skip to the next track, the track number is displayed.
2. Press (11) to skip to the beginning of the track.
3. Press (11) again to skip to the previous track.
Search +/- ( /
1. Press and hold
2. Press and hold
Repeat/Random
Press REPEAT/RANDOM (9) to cycle through the repeat and random playback modes as follows:
For CDs
(1) REPEAT 1 (2) REPEAT ALL TRACKS
LCD indicator
Playback mode LCD display
Repeat track
Repeat all
Random RAN
Repeat off --------------
Repeat Mode
You can repeat the desired track or the entire disc.
Random Playback
You can listen to all tracks in random order.
Program Mode
Up to 32 tracks can be programmed in your desired sequence. First set the system to stop mode:
1. Set the system to stop mode.
2. Press PROGRAM (13), PROG and the memory position are shown on the LCD display (2).
3. Press or (24, 11) to select the desired track.
4. Press PROGRAM (13) to save the track.
5. Repeat steps 3 and 4 to enter additional tracks, if desired.
6. After programming, press
7. Press (8) until PROG disappears on the LCD display (2) to stop program playback.
)
(25) for forward search (Fast Forward).
(12) for reverse search (Rewind).
(21) to play the disc in the programmed sequence.
(3) RANDOM (4) REPEAT OFF
EN-3