Bosch GTS 10 XC Professional Manual Original página 40

40 | English
Maintenance and Service
Maintenance and Cleaning
 Before any work on the machine itself, pull the mains
plug.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning
– For safe and proper working, always keep the power tool
and its ventilation slots clean.
– Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Power Tool Lubrication
Lubricants:
SAE 10/SAE 20 engine oil
– If required, open the bottom plate and apply oil to the lubri-
cation points of the power tool at the indicated locations.
(see figures S1–S2)
An authorized Bosch after-sales service agent will carry out
this work quickly and reliably.
Observe all applicable environmental regulations when
disposing of old grease and solvents.
Measures for Noise Reduction
Measures on behalf of the manufacturer:
– Soft starting
– Delivery of the machine with a saw blade developed partic-
ularly for noise reduction
Measures on behalf of the user:
– Low-vibration assembly on a firm working surface
– Use of saw blades with noise-reducing functions
– Regular cleaning of saw blade and power tool
Accessories
Dust bag
Y-adapter TSVH 3
Angle stop
Push stick
Saw stand GTA 60 W
Saw stand GTA 6000
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 254 x 30 mm, 40 teeth
Saw blade 254 x 30 mm, 60 teeth
1 609 92A 15S | (29.1.15)
After-sales Service and Application Service
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Article number
Fax: (01300) 307045
2 605 411 205
Inside New Zealand:
2 610 015 513
Phone: (0800) 543353
2 610 015 508
Fax: (0800) 428570
Outside AU and NZ:
2 610 015 022
Phone: +61 3 95415555
0 601 B12 000
www.bosch.com.au
0 601 B24 100
Republic of South Africa
Customer service
Hotline: (011) 6519600
2 608 640 443
Gauteng – BSC Service Centre
2 608 640 444
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
Bosch Power Tools