Blueair HealthProtect 7300 Serie Manual Del Usuario página 22

Care and maintenance
General
•
Disconnect the air purifier from the power supply before maintenance.
•
Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric
shock or damage the air purifier.
•
Never clean with gasoline, chemical solvents or corrosive materials as these agents may
damage the air purifier.
•
Make sure the air purifier is completely dry before connecting it to power.
•
Do not wash the main filter. The main filter is not washable or reusable.
Cleaning
•
Clean the pre-filters by wiping with a dust cloth or vacuuming with a soft brush
attachment.
•
Wipe the exterior of the air purifier with a soft, clean, damp cloth.
•
Open the door, clean the inside of the door with a soft, clean cloth.
•
Vacuum the small air inlets with a soft brush attachment.
•
Vacuum the inside of the air purifier with a soft brush attachment.
•
Clean and check the power cable and power plug for wear or damages.
•
Clean the sensor when changing the main filter.
Air quality sensor
The inlet for the air quality sensor is located on the side of the
air purifier. Vacuum the inlet with a soft brush attachment.
22