SOLAC SO QUIET TEMPERED Instrucciones De Uso página 7

ENGLISH
DESCRIPTION
A Platform
B LCD screen
C Set button
D Up/down buttons
E Male symbol
F Female symbol
G Age symbol
H Height symbol
I Weight unit (Kg, Lb, St)
J Battery compartment lid
K Weight unit selector button
L Electrodes
M Body fat porcentage
N Body water porcentage
O Bones mass porcentage
P Muscle mass porcentage
Q Health level indicator
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Do not overload the appliance's weight
capacity.
- Remove the batteries from the appliance if
you are not going to use it for some time.
- This appliance is for household use only, not
professional, industrial use.
- This appliance isn't valid for trade.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- CAUTION: Do not use the appliance if the
glass is cracked or broken.
ASSEMBLING THE BATTERY
- Caution: During the handling of batteries, do
not touch both poles at the same time, as
this will provoke the partial discharge of the
stocked energy therefore affecting longevity.
- Remove the cover of the battery compart-
ment.
- Check that the plastic covering that protects
the battery has been removed (some batteries
are sold with a protective covering).
- Put the battery in its compartment, respec-
ting the polarity (Fig.1).
- Replace the cover of the battery compart-
ment.
- N.B. When changing the battery, the confi-
guration of the appliance will be removed,
and you will need to reset the parameters of
the appliance.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
WEIGHING UNITS SELECTOR KG/LB/ST:
- The appliance has a selector of weighing
units; put the selector in the position accor-
ding to those units you want to work with.
(Fig.2).
USE:
- Turn the appliance on, by pressing lightly
on the weighing platform and wait for the
screen to show 0,0.
- Place yourself in the centre of the platform
avoiding abrupt movements, maintaining
immobile and without touching other
objects, until the appliance shows your
weight.
WEIGHING UNITS SELECTOR FUNCTION
KG/LB/ST:
- The appliance has a selector of weig-
hing units, put the selector in the position
according to those units you want to work
with. To do so, press the "UNIT" button, the
measuring unit selected will then be shown
on screen one after the other. (Fig.3).
PROGRAMMING PERSONAL DATA
- Gently press the surface of the scale with
your foot to switch it on.
- Press the Set button and use Up/down
button to find the memory number under
which you wish to save your personal data
(10 memories available). Then press the
Set button to confirm your choice.
- Select male or female by using up/down
buttons and confirming by pressing Set
button.
- Log in your age using the up/down buttons
and confirming by using Set button.
EN