Setting the System
5
Press TIME ADJ once again to confirm the
clock setting.
"Adjusted" appears in the front panel display for a
few seconds, and then the clock appears.
y
You can switch between 12-hour (AM/PM) format and 24-hour
format by pressing HOUR or MIN while the clock is displayed in
the front panel display.
Step 3: Set the aspect ratio
Follow the procedure below to configure the aspect ratio
setting of the DVD player. (The default setting is "4:3
PAN SCAN".)
ON SCREEN
INFO.
A-E
SET UP
SET UP
TV VOL
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
1
Press SET UP.
The setup menu appears on the TV screen.
2
Press
or
repeatedly to select "VIDEO
SETUP PAGE".
3
Press
or
to select "TV DISPLAY", and
then press
.
20
En
MENU
PRESET
Cursor keys,
ENTER
A-E
ENTER
TOP MENU
/RETURN
VOLUME
DISPLAY
4:3 PAN SCAN
4:3 LETTER BOX
16:9
4
Press
or
to select the desired
setting, and then press ENTER to confirm the
selection.
4:3 PAN SCAN
Select this if the aspect ratio of your TV is 4:3 and
you want both sides of the picture to be trimmed or
formatted to fit your TV screen.
4:3 LETTER BOX
Select this if the aspect ratio of your TV is 4:3. In this
case, a wide picture with black bands on the upper
and lower portions of the TV screen are displayed.
16:9
Select this if you have a widescreen TV.
5
To exit from the setup menu, press SET UP
once again.
Step 4: Set the OSD language
Follow the procedure below to configure the language
setting used for the OSD and setup menus. (The default
settings is "ENGLISH".)
ON SCREEN
INFO.
A-E
SET UP
SET UP
TV VOL
GENERAL SETUP PAGE
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DIVX(R) VOD CODE
1
Press SET UP.
The setup menu appears on the TV screen.
2
Press
or
to select "GENERAL SETUP
PAGE".
3
Press
or
to select "OSD
LANGUAGE", and then press
4
Press
/
to select the desired
language, and then press ENTER to confirm
the selection.
MENU
PRESET
Cursor keys,
ENTER
A-E
ENTER
TOP MENU
/RETURN
VOLUME
DISPLAY
ENGLISH
ESPAÑOL
PORTUGUÉS
.