Hansgrohe Axor Starck 107151 Serie Instrucciones De Montaje / Manejo / Garantía página 8

1
2
3
8
1
2
English
Installation
(1) Turn the water off at the main.
(2) Cut the plaster shield so that it extends ¹⁄₁₆" - ⅛"
from the finished wall surface.
Seal the wall around the plaster
shield with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Remove the flush insert screw using a 5 mm Allen
wrench.
Remove the flush insert and seal.
Install the function block.
Tighten the function block screws using a 4 mm Allen
wrench.