Routine Maintenance; Blade Replacement - Cembre B500-TFC Manual De Uso Y Mantenimiento

3.3) Routine maintenance

When the pump reaches the predetermined number of hours worked, it will signal that routine
maintenance is recommended.
The pump will continue to work however 15 sec. after use an alarm comprising 3 beeps
combined with illumination of the worklights will signal that its return to Cembre for
service is recommended (see § 6).

4. BLADE REPLACEMENT

When changing blades, the battery must fi rst be removed from the tool.
Incorrect blade positioning can damage the tool.
After extended use, the blades may loose their
cutting edge.
Replace the blades as follows:
Remove the die set from the tool, operate
the tool to advance the blade (4) until the
split pin (13) in the ram (14) is accessible.
Use a suitable drift to remove the split pin
(13) and release the blade (4).
Note the orientation of the blade (4).
Remove the blade and fi t the replacement.
Fit the split pin (13) and release the oil pressure.
5. CONNECTION TO COMPUTER
The memory card integrated in the tool records operating data from 200.000 cycles for transfer via
the USB cable supplied.
To view and manage this data, go to www.cembre.com and register in the dedicated area, then
download the free Cembre software CEM_SWBT01.
Keeping the Firmware of the tool updated, via free of charge download from here, will optimise
the tool's performance.
_________________________________________________________________________________
Following information applies in member states of the European Union:
USER INFORMATION in accordance with "Directives 2011/65/EU and 2012/19/EU.
The 'Not in the bin' symbol above when shown on equipment or packaging means that the equipment
must, at the end of its life, be disposed of separately from other waste.
The separate waste collection of such equipment is organised and managed by the manufacturer.
Users wishing to dispose of such equipment must contact the manufacturer and follow the prescribed
guidelines for its separate collection. Appropriate waste separation, collection, environmentally com-
patible treatment and disposal is intended to reduce harmful environmental eff ects and promote the
reuse and recycling of materials contained in the equipment. Unlawful disposal of such equipment will
be subject to the application of administrative sanctions provided by current legislation.
13
14
4
10