THUNDEROBOT TC-G50 Manual Del Usuario página 11

The number next to the channel indicator is marked for convenience, which is different from the
Actual product. " " indicates that the light is on and "
* 1 Xinput is Microsoft XBOX gamepad connection protocol standard that supports
Vibration.
* 2 Dinput is an enhanced Android gamepad connection protocol standard that
Supports vibration.
* 3 Nintendo Switch host base USB 2.0 interface supports wired connection, USB 3.0
Interface does not support wired connection and can only use two wired pads at the
Same time;
* 4 In a Windows operating system, XBOX (Xinput) and Android (Dinput) pad are
Compatible. Generally, computer games use Xinput mode, while Android simulators use
Dinput mode on computers. When using USB connection, the mode can be switched
Successfully by pressing MODE key for 2 seconds and accompanied by a vibration.
* 5 When using USB to connect to Windows operating system, the vibration function
Of Windows 7 needs to install XBOX pad driver. Windows 8/10 directly supports the
Vibration function.
* 6 When using Bluetooth to connect to Windows operating system, only Windows 8/10
Supports vibration directly.
* 7 Dinput connected to Windows OS shake function needs relevant driver support (2.4
G&Bluetooth-Android Driver). Software can be downloadedfrom Thunderobot
Website and the shake function of Android device connection depends on the
Standard of device manufacturer.
* 8.Switch mode has six-axis experience without amiibo's NFC function. If necessary,
Use the pad that comes with Switch.
* 9 Switch wired and wireless mode: when the MODE key is pressed short, the video
Starts or stops long, and continues to press for about 5 seconds, accompanied by a
Vibration, the AB and XY keys are replaced;
(To prevent the video function from being enabled when the key position is changed, please switch the key
position when the video function is disabled in the Switch main interface)
Useful Information (Convenient Memory and Confirmation of Work Mode)
1.Channel indicator 1 lights up to indicate that USB cable mode is started.
When connecting with USB cable, channel lights 12 and 13 are lit to indicate corresponding
Xinput and Dinput modes.
2.Channel indicator 4 lights up, indicating Bluetooth wireless mode start-up; In Bluetooth
Wireless connection, channel lights 24, 34, 14, 124 are lit, indicating Xinput, Dinput,
Android virtual touch, iOS virtual touch mode.
Mode Notes
" indicates that the light is off.
9