Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting Bluetooth® device
Place the handle within about 1 meter (3.3 feet) from the Bluetooth device.
Use the instructions to check the operation of the equipment as required.
Matching and Connecting Bluetooth® device （ registration）
1. When the power is off, one key in the X/Y/A/B/START key and the HOME
Key are pressed at the same time until the corresponding channel
Indicator flickers quickly (Switch mode is up and down for channel
Indicator 1-4) and enters the matching mode.
2. Turn on the power supply of the Bluetooth device and turn on the
Bluetooth device function.
3. Choose "THUNDEROBOT G50" or "GamepadX" from the menu of the
Bluetooth device.
■ Before displaying the handle name, the MAC address may be highlighted (an alphanumeric string that
Is displayed by the device and unique to the device)
■ Xinput mode shows "GamepadX" and Dinput / virtual touch mode shows "THUNDEROBOT G50"
4. Check the connection with Bluetooth device on the handle.
The channel indicator will stop flickering until it is connected to the
Device.When the channel indicator shows the selected mode, the
Matching process is completed. (Connection established)
Note
If the device is not established within about one minute, the pad will be closed. Please try
Again.
Pad can only be matched with one Bluetooth device. While being connected to other devices,
The last one will be replaced. Please try again. Virtual touch mode can independently
memorize 8 BLE Android/iOS devices.
Connecting Matched Bluetooth® Device
1. Press HOME [
] key directly and long to pair the gamepad to the last
Device used.
■ When the channel indicator stops flickering quickly and displays the corresponding mode status
indication, the reconnection is completed.
Note
Pad remembers the last connected device. After step 1, it can be automatically connected (see
Above).
This pad supports Nintendo Switch's LB + RB fast return function. Therefore, in Swash wireless
Bluetooth mode, LB + RB is simultaneously pressed to go back to the last connected Switch game.
In order to prevent accidental boot-up, the gamepad needs to be placed in a special bag.
10
[
]
Publicidad
