THUNDEROBOT TC-G50 Manual Del Usuario página 17

Using Virtual Touch Control KeyLinker
● Using Bluetooth Low Energy
Supported smartphones
Android: Android 5.0 or higher, with Bluetooth 4.0 or higher
(excluding devices that do not support Bluetooth low energy)
IOS: iOS 11.0 or higher (excluding iPad2
On G50 gamepad
Press A + HOME or B + HOME to enter the matching mode.
On smartphones
1. Start KeyLinker.
2. Choose [Bluetooth].
3. Open Bluetooth.
4. Select the device name THUNDEROBOT G50 displayed from the
Bluetooth device list
Connect the pad to Bluetooth on the smartphone.
●
Start KeyLinker to set the layout and type of pad virtual touch control
KeyLinker is used to set up pad and game control configuration
Scheme. KeyLinker APP will constantly update its functions.
Please refer to the online help of APP for detailed setting methods
And techniques. In use, press the MODE key of G50 to pop up the
KeyLinker Suspension Settings menu.
Firmware Upgrades
● Via USB
After starting the latest firmware upgrade software on the computer,
Hold the L3 key and insert the USB cable. Click the upgrade button
When it is available.
● Via KeyLinker App（OTA upgrading）
When a gamepad is connected to a mobile phone via Bluetooth, it can
Be upgraded through the firmware upgrade menu item of KeyLinker.
Due to the different functions of the improved hardware, USB cable and Bluetooth
Wireless of APP software may be required to upgrade Pad separately at the same
Time. Usually, USB connection upgrades focus on pad's basic button mode
Functions, while OTA upgrades focus on pad's virtual touch mapping
(Android and iOS) features.
15