THUNDEROBOT TC-G50 Manual Del Usuario página 9

Charging
The rechargeable battery (mounted in the gamepad) is not fully
Powered. Please charge before using the gamepad.
Connect gamepad using a USB Type-C cable to a computer or
USB power source
● A flashing red light indicates that the gamepad is charging. A consistent red
Light indicates charging is completed.
● It takes about two hours for the battery to be fully charged from empty.
● Please charge at room temperature between 10 and 35℃ (50 to 95 ℉ ).
● It takes about two hours for the battery to be fully charged from empty.
● When connecting the gamepad to a computer with a USB cable, the Bluetooth®
Function will not be available. The device will connect to the computer via USB
Cable.
● Gamepad cannot be switched off when connected to a computer.
● Gamepad will stop charging if the computer is in sleep or standby mode.
Switching on/off
To switch on, long press X/Y/A/B/START simultaneously with the
HOME Button. [ ]，until the corresponding channel indicator
(1-4) lights up and flickers quickly, entering pairing mode. long
Pressing only the HOME button [
It to the last platform used.
Turn off the power
To switch off, hold the HOME Button [
Note
If the gamepad is connected to a device via Bluetooth, the gamepad will automatically
Turn off if idle for about 5 minutes to conserve power.
When connecting via cable, the gamepad can automatically identify compatible devices
And select the appropriate startup mode. The gamepad cannot be switched off when
Connected via to a computer.
] starts the devices and pairs
] for 3 seconds.
7