THUNDEROBOT TC-G50 Manual Del Usuario página 14

Idiomas disponibles

Fonctions utiles

Setting of Programmable Macro Key M1/M2/M3/M4

To simplify the key operation of some games, key sequence input is

Performed for direction keys and ABXY and LB/RB/LT/RT. For example, in

Combat games, there are various ways.

1. Macro key setting method

Hold down a programmable macro key in M1-4 and press START to

Start the macro programming input mode. The stick turns pink. In

The d-pad, ABXY or LB/RB/LT/RT, press the required key sequence in

Turn.After editing, press the same macro key and save the edited key

Sequence. Other macro keys will not record the edit.

2. Clearance of macro keys

Hold down a programmable macro key in M1-4 and press START

Key to start the macro programming input mode. At this time stick

Becomes pink. Press the macro key again without entering any key to

Clear the key sequence.

■ When leaving the factory, M1-4 is set to have no corresponding buttons. If you want to use

Macro button function, please set it first.

■ In order to prevent mistakenly touching, when macro keys are not needed, please clear the

Key sequence saved by macro keys.

■ In USB cable mode, the macro key data of Bluetooth PC, Android and Switch will not be

Saved after power is turned off.

Switch Connecting Channel Confirmation

When pad connects to Switch host for the first time, hold down Y key

And press HOME [

] key at the same time. Channel indicator 1-4 starts

Matching. For the pad of the same switch that has been matched, even

If the power is off, it can be quickly connected back by pressing the LB +

RB key. This fast connection mode is only valid in Switch mode. When the

Match is successful, the Switch host will automatically allocate channel

Numbers in the order of device connection. The eight channels of Switch

Are indicated in the following table:

No.

Indicator

● Pad Channel Indicator Display is consistent with Switch Control Interface Distribution

● Eight G50pads may not be connected at the same time when the Switch Bluetooth connection

Device is different