THUNDEROBOT TC-G50 Manual Del Usuario página 16

Using Virtual Touch Control KeyLinker
Connecting to Smart Phone/Tablet Computer with
Virtual Touch Control (KeyLinker)
● Smartphone/Tablet Application Installation for
"KeyLinker"App
Operation system
Android®：Android 5.0 above (Android 5.0 or higher is required to
Use virtual touch, and virtual touch features are not supported for
MTK's CPU handsets/tablets)
IOS: iOS 11.0 or more (Note that for iOS 10.x and below, connect
Using A + HOME mode, and in this state, you can't get all the
Features of virtual touch multi-point mapping)
Software download and installation
Android®
After validating and binding the independent sequential two-
Dimensional codes on the back of the Wechat scanner handle
From the Android device, get the "KeyLinker" APP from the
Google Play Store and install it.
iOS
1. Connect smartphone to the Internet
2. Select App Store.
3. Enter "KeyLinker" into the search box.
4. Select "KeyLinker" and install it.
14