Functional Description - Makita LS1017 Manual De Instrucciones

Sierra de inglete telescópica
Ocultar thumbs Ver también para LS1017:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ADDITIONAL SAFETY RULES
FOR THE LASER
CAUTION:
LASER RADIATION
BEAM.
AVOID EXPOSURE - LASER RADIATION IS
EMITTED FROM APERTURE.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN
THOSE
RESULT
IN
EXPOSURE.
COMPLIES WITH 21CFR 1040.10 AND
1040.11
AVOID EXPOSURE – LASER RADIATIONS
IS EMITTED FROM THIS APERTURE
CONFORME A 21CFR 1040.10 ET 1040.11
EVITEZ L'EXPOSITION - UN
RAYONNEMENT LASER EST EMIS PAR
CETTE OUVERTURE.
CAUTION /PRECAUCIÓN
LASER RADIATION DO NOT STARE INTO BEAM
RADIACIÓN LÁSER NO DIRIJA LA
VISTA HACIA EL RAYO LÁSER
Maximum Output
< 1mW, Wavelength : 650 nm
CLASS
LASER PRODUCT
011387
INSTALLATION
Bench mounting
1
010228
When the tool is shipped, the handle is locked in the
lowered position by the stopper pin. Release the stopper
pin by simultaneously applying a slight downward
pressure on the handle and pulling the stopper pin.
WARNING:
Ensure that the tool will not move on the
supporting surface. Movement of the miter saw
on the supporting surface while cutting may result
in loss of control and serious personal injury.
DO NOT STARE INTO
SPECIFIED
HEREIN
HAZARDOUS
RADIATION
1. Stopper pin
USB088-3
1
011382
This tool should be bolted with four bolts to a level and
stable surface using the bolt holes provided in the tool's
base. This will help prevent tipping and possible injury.
MAY

FUNCTIONAL DESCRIPTION

WARNING:
Always be sure that the tool is switched off and
unplugged
function on the tool. Failure to switch off and
unplug the tool may result in serious personal injury
from accidental start-up.
Blade guard
010386
When lowering the handle, the blade guard rises
automatically. The blade guard returns to its original
position when the cut is completed and the handle is
raised.
WARNING:
Never defeat or remove the blade guard or the
spring which attaches to the guard. An exposed
blade as a result of defeated guarding may result in
serious personal injury during operation.
In the interest of your personal safety, always maintain
the blade guard in good condition. Any irregular
operation of the blade guard should be corrected
immediately. Check to assure spring loaded return action
of guard.
WARNING:
Never use the tool if the blade guard or spring
are damaged, faulty or removed. Operation of
the tool with a damaged, faulty or removed guard
may result in serious personal injury.
5
1. Bolts
1
before
adjusting
or
1. Blade guard
1
checking

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ls1017l

Tabla de contenido