hafele WT 400 Manual De Instrucciones página 81

5.6 Installation of the WTX 200
Fig. 7: WTX 200 installation - setting jumper
1. Depending on the installation variant, set jumper [A] to determine the assignment of the
6 terminal strips on the controller.
Example: For installation option 5, place the jumpers on WTX 200 as shown in Fig. 33:,
page 118.
Further information and examples:
• 6.4 Structure and pin assignment of the WTX 200, page 89
• 6.5 Assignment options for the additional connections at the 6 controller screw
terminals, page 90
• 6.6 Use of the extension board WTX 200 for 4 additional analogue/digital inputs,
page 91.
• 6.7 Use of the WTX 200 extension board with 2 additional relay output ports and
1 additional analogue/digital input port, page 92
B
Fig. 8: WTX 200 installation - installing spacers
2. Attach the spacer [B] to the controller on the WTX 200 (4x in scope of delivery).
A
B
81