hafele WT 400 Manual De Instrucciones página 87

6.2 Connections on the WTC 200
K
Fig. 14: WTC 200 connections
Connection Description
A • Additional connections when installing the WTX 200extension
B • Mini USB connection (without function)
C • Network connection RJ45 (10/100 MBit) with status LEDs
• Network connection for communicating with the server and Dialock software 2.0.
R • Holder for Micro SD card
E • Holder for SIM card (without function)
F • Pins for clipping on the WTX 200 extension
G • Removable cover
H • RS485 connections (terminals 8, 9, 10)
• Max. 2 readers possible on an RS485 connection
• Max. 4 readers on the controller can be managed with the Dialock software
• Lead length max. 200 m
• Connection of readers (A to A; B to B) and extensions
• Power supply of extensions max. 0.5 A;
• Voltage supply of the extensions: voltage applied to terminal 1 (pos. 11) minus
approx. 1 V
I • Relay output ports (terminals 6 and 7) 30 V / 2 A
• Lead length max. 25 m
• For example: Connection of electric strikes (depending on electric strike: NO and C
or NC and C), external signal generators (NO and C)
J • Analogue input ports (terminals 2-5)
• Lead length max. 25 m
• For example: Connection of door signalling contacts
K • Connection of external power supply (terminal 1) 12 V - 24 V DC
F
A B
J I
C
D
E
F
G
H
87